Weight | 0.350 kg |
---|---|
Dimensions | 19 × 16 × 2.5 cm |
“Graphite” Wooden Pen Box | Pen Display | &
€250.00 incl VAT
FEATURES
✔️Currently with FREE ENGRAVING
✔️Completely handmade from raw materials
✔️Custom size upon request
✔️Custom Wood Combination upon request
✔️Simple and Elegant
✔️Slots are 7.5in/19cm long and available in 2 different widths:
📌Thin: 0.5in=1.2cm wide (all pictures shows thin groove)
📌WIDE for fountain style Pens: 3/4inch =1.8cm
✔️Lid that stays at 90 degrees
✔️Expect the wood to develop a patina over time, producing a darker, more defined appearance
✔️Finished in oil, in order to seal it and enhance the colour and grain.
⚠️The item you will receive will be almost the same to the one in pictures (according to your choice), items vary as wood has differences in wood grain and darkness.
LEVELS /PEN SLOTS
▶2 Levels
where the top is less than half the width and its slides left to right to allow access to the lower level.
it can be made to accommodate:
▪️ 10+4 slots (as shown at pictures 1-5)
Inches: 11.2 x 9 x 4.3
CM: 28.5 x 23 x 11
▪️ 12+5 slots
Inches: 13.2 x 9 x 4.3
CM: 33.5 x 23 x 11
▪️ 14+6 slots
Inches: 15 x 9 x 4.3
CM: 38.5 x 23 x 11
▶1 Level, where all pen slots are in one line, it can be made to accommodate:
▪️ 10 Pen Slots
Inches: 11.2 x 8.5 x 2.3
CM: 28.5 x 21.5 x 6
▪️ 12 Pen Slots
Inches: 13.2 x 8.5 x 2.4
CM: 33.5 x 21.5 x 6
▪️ 14 Pen Slots
Inches: 15 x 8.5 x 2.4
CM: 38.5 x 21.5 x 6
WOOD COMBINATIONS
▶STANDARD (as shown at pictures):
▪️ Main Box: Walnut
▪️ Pen Slots: Walnut
▪️ Pen Slot Edges: Birch (⚠️ Single Layer Boxes do NOT have separate edges as are attached to the box sides)
▪️ Window inner trim: Birch
▪️ Spines at corners: Birch
🚨actual item shown at pictures shows standard Combination with Thin grooves
▶Custom Combination
You can create your Custom Combinations using available woods:
▪️ Iroko (also known as African TEAK)
*Iroko has a lot of tone variances. Check the last picture of this listing https://lightwavessense.etsy.com/listing/1729940656
▪️ Birch
▪️ Walnut
▪️ Oak
Just sent me a note of the wood that you want for every piece:
▪️ Main Box: ……….
▪️ Pen Slots: ……….
▪️ Pen Slot Edges: ………. (⚠️ONLY for double layered boxes)
▪️ Window inner trim: ……….
▪️ Spines at corners: ……….
ENGRAVING OPTION
🎟️ENGRAVING OPTION:
Engraving for this item can be made on the “window”
👉if asked, i can provide an engraving preview
👉see pictures for sample
👉Font samples as shown at last 2 pictures
⚠️Please note the “S” and “Z” character of Font 1**
⚠️If font is not specified at your notes, i will use what i believe looks best
Reviews
There are no reviews yet.